THE ARCHETYPE WHIRLER

 

Use of water filters and Reverse osmosis systems:

The construction of the arched type whirler assures a perfect vortex, even with low volumes of water which is ideal as a table water-filter with low water flux and the RO system (about 2 l of water per/min). The water flow or the vortex can be adjusted using a standard screwdriver from below (after the aerator has been unscrewed) through the water outlet opening itself. Newly fitted filter cartridges allows for more flow at the beginning but will reduce after a while due to particles caught in the filter. This can be adjusted accordingly. The water flow has been set to maximum from the manufacturers.

​

High Quality Materials:

The EggyWhirler is manufactured exclusively with high quality, stainless steel in accordance with drinking water regulations. If used in combination with water characterised by a low ph value (such as reverse osmosis water) no corrosion will occur.

​

Use in Combination with Water Filters and Reverse Osmosis Systems:

The design (see above) allows for ideal whirling, even in combination with low amounts of water and can easily be operated with filters for table water and reverse osmosis systems (beginning at 2 liter water capacity per minute).

​

Installation Options:

The EggyWhirler can either be attached via an M22x1 external fine thread or alternately to faucets with an M24x1 internal thread (adapter included).

​

Easy Cleaning:

The EggyWhirler can even be cleaned in the dishwasher. Please remove the energizing media beforehand.

Weight: ca.115g
Size: ca.45mm
Diameter: 35mm

​

Photographed Water crystal of drinking water

photographed on top of frozen water drops. Water drops of drinking water, energised with the Eggy Whirler, have been frozen and photographed digitally under the microscope. To compare with distilled water: there are very seldom crystalline shapes, messages, stars, etc. visible when we freeze distilled water drops.